![Assembly instruction of 3D cases for SnapBeat.](https://snapbeat.net/wp-content/uploads/2023/07/IMG_20230729_155316_761_R-768x622.jpg)
Here is procedure of assembly 3D cases for SnapBeat.
![Pre-soldered board of SnapBeat, the simple Lo-fi sampler](https://snapbeat.net/wp-content/uploads/2023/07/IMG_20230729_154507_288_R-768x512.jpg)
The LCD is attached onto PCB with 3D printed LCD holders.
![photo from back of SnapBeat, the simple Lo-fi sampler](https://snapbeat.net/wp-content/uploads/2023/07/IMG_20230729_154818_943_R-768x300.jpg)
Place the back panel.
![photo of SnapBeat PCB and bottom case](https://snapbeat.net/wp-content/uploads/2023/07/IMG_20230729_154930_512_R-768x343.jpg)
![photo of SnapBeat PCB in the bottom case](https://snapbeat.net/wp-content/uploads/2023/07/IMG_20230729_155155_564_R-768x513.jpg)
Put pre-soldered board into the bottom case.
The bottom and top cases have enough strength with rib structure.
![photo of SnapBeat PCB, bottom and top cases](https://snapbeat.net/wp-content/uploads/2023/07/IMG_20230729_155316_761_R-1-768x622.jpg)
![](https://snapbeat.net/wp-content/uploads/2023/07/IMG_20230729_155403_555_R-768x506.jpg)
Put the top case.
![photo of screwing SnapBeat bottom case](https://snapbeat.net/wp-content/uploads/2023/07/IMG_20230729_155647_725_R-768x628.jpg)
Fix the bottom and top cases with screws at two corners.
![photo of SnapBeat, top case front](https://snapbeat.net/wp-content/uploads/2023/07/IMG_20230729_155928_196_R-768x569.jpg)
![](https://snapbeat.net/wp-content/uploads/2023/07/IMG_20230729_160017_305_R-768x509.jpg)
Place the top front case.
![](https://snapbeat.net/wp-content/uploads/2023/07/IMG_20230729_160117_344_R-768x500.jpg)
Fix the bottom and top front cases with screws at two corners.
![](https://snapbeat.net/wp-content/uploads/2023/07/IMG_20230729_160240_082_R-768x494.jpg)
Put rubber feet at the four corners.
![](https://snapbeat.net/wp-content/uploads/2023/07/IMG_20230729_160329_837_R-768x527.jpg)
Assembly is completed.
![photo of SnapBeat, gray and bone white color variations, the simple Lo-fi sampler](https://snapbeat.net/wp-content/uploads/2023/07/IMG_20230729_165807_591_R-1024x638.jpg)
Now, SnapBeat has two color variations (left : gray, right : bone white)
On 7/29 today, only pre-soldered board is available on Tindie, but I’m going to list these two colors finished product with cases.